While the bathroom may only take up a small part in your entire house, it is a place where wastage is rampant. It is a hotspot for excessive paper waste and overindulgent water use. If your bathroom seems more like a place where wastage happens instead of a green haven, here are a few points that will help you:
Install a low-flow toilet
Did you know that your toilet consumes approximately 27 percent of the water in your home? This is more than any other appliance or plumbing, including the washing machine and shower. Replacing your toilet with a low-flow model will save more water because less will be required to flush. While some low-flow toilets require you to hit the handle more than twice, modern ones provide plenty of flushing power while using just a fraction of the water. If you have a low-flow toilet, you can reduce water usage even more by installing a dual-flusher – it gives you options for flushing either liquid or solid waste.
Install low-flow showerheads
Taking a short shower is one of the best ways to cut water usage. If you are inside the shower for more than five minutes, you need a low-flow showerhead. The ordinary showerhead uses between 5 and 8 gallons of water per minute. Low-flow showerheads, on the other hand, use only 2.5 gallons of water or less with the same pressure. When you install a low-flow showerhead, you save in the following ways:
- By reducing the energy used in heating water
- By reducing the amount of water used to shower
The manufacturers of these showerheads claim that homeowners save hundreds of dollars each year by installing low-flow showerheads. If you have the money, you should also consider installing showerheads with built-in filters: they remove impurities such as chlorine from water, giving you healthier skin and softer hair.
Install motion sensor faucets
Your bathroom sink is another area where water is wasted. Despite their best efforts, people find themselves using excess water when washing their face or brushing their teeth. One way to reduce water wastage is by installing a motion-sensing faucet which can be just as fancy looking as the latest slew of modern-looking ones, but these anticipate your water usage and turn themselves on only when you need water. Moreover, such faucets will keep your bathroom cleaner by reducing the gunk that builds up on the handles.
Changing your light bulbs
You need to change your bathroom lights to LEDs. It is one of the easiest ways to save your energy bill and eliminate the need to keep changing bulbs. On average, an LED bulb will consume 80% less energy than typical bulbs and last 25 times longer. Since it operates at a lower wattage, changing a single bulb will save you hundreds of dollars in energy.
Install an energy-efficient vent fan
Is the ventilation in your bathroom top quality? If you use a ventilation fan to keep moisture away, you should replace it with one that is Energy-star rated. Although a fan is only switched on several times in a day, an energy-efficient one will provide you with up to 60 percent energy savings. You should keep your fan running during showers to ensure that moisture does not turn into mold.
Before buying any of these replacements, you should at your current water bill. Is it too high? The best way to bring it down is by installing toilets and showerheads that allow you to save on water. As you remodel your bathroom to make it greener, you should consider installing Bathroom City basins, as they are high quality and affordable.
Article Submitted By Community Writer
